High lift bucket GHU 12

Basic specifications:

Double-acting telescopic cylinder in three-point frame
Cat. II three-point hitch
Flat bucket base with welded on digging edge of Hardox
Removable swinging back bord
Fastening eyelet at the side walls

Standard sizes:

all with bucket depth 1.20 m, end/side wall height 0.70 m:

  GHU 2.20m/12 - bucket width 2.20 m, weight 533 kg
  GHU 2.35m/12 - bucket width 2.35 m, weight 549 kg
  GHU 2.50m/12 - bucket width 2.50 m, weight 564 kg

High lift bucket GHU 10

Basic specifications:

Single-acting telescopic cylinder in three-point frame
Cat. I and II three-point hitch
Torsion rod springs for quick lowering in final position
Automatic locking in final position
Flat bucket base with changeable digging edge
Removable swinging silage side

Standard sizes:

all with bucket depth 1.00 m, end/side wall height 0.60 m:

  GHU 1.40m/10 - bucket width 1.40 m, weight: 280kg
  GHU 1.70m/10 - bucket width 1.70 m, weight: 300kg
  GHU 1.85m/10 - bucket width 1.85 m, weight: 310kg
  GHU 2.00m/10 - bucket width 2.00 m, weight: 340kg
  GHU 2.20m/10 - bucket width 2.20 m, weight: 360kg

Additional equipment:

Upper silage side (end/side wall heightened by 30 cm)
Extended trough 30cm
RAL 2000 special lacquer

High lift bucket GHU 08

Basic specifications:

Single acting telescopic cylinder in three-point frame
Cat. I three-point hitch
Torsion rod springs for quick lowering in final position
Automatic locking in final position
Flat bucket base with changeable digging edge
Removable swinging silage side

Standard sizes:

all with bucket depth 0.80 m, end/side wall height 0.60 m:

  GHU 1.40m/08 - bucket width 1.55 m, weight: 230kg
  GHU 1.55m/08 - bucket width 1.55 m, weight: 240kg
  GHU 1.70m/08 - bucket width 1.70 m, weight: 250kg
  GHU 1.85m/08 - bucket width 1.85 m, weight: 260kg
  GHU 2.00m/08 - bucket width 2.00 m, weight: 270kg

Additional equipment:

Extended trough
Kommunal RAL 2000 special lacquer

High lift bucket GHU 06

Basic specifications:

Double-acting telescopic cylinder in three-point frame
Cat. I three-point hitch
Flat bucket base with changeable digging edge
Removable swinging silage side

Standard sizes:

all with bucket depth 0.60 m, end/side wall height 0.35 m:

  GHU 1.20m/06 - bucket width 1,20 m

High lift bucket GHK Kommunal

Basic specifications:

Double-acting telescopic cylinder in three-point frame
Cat. II and III three-point hitch
Flat bucket base with welded on digging edge of Hardox
Removable swinging back bord
Fastening eyelet at the side walls
Communal design for tractors over 100 PS
RAL 2000  lacquer

Standard sizes:

all with bucket depth 1.20 m, end/side wall height 0.70 m:

  GHK 2.50m/12 bucket width 2,50 m