en

Choose Your Country / Language

Switzerland

goeweil.ch

Square bale wrapper with bale pick-up
G3010 Q Exclusiv | Square bale wrapper

 

Equipped with a hydraulic bale pick-up, the G3010 Q Exclusiv is distinguished by its robust design as well as its low working height. The wide, continuous bale conveyor belt guarantees uniform wrapping of each and every bale - even if it is misshapen. The wrapper is equipped with the program control STANDARD including radio remote control.

Highlights

The G3010 Q Exclusiv packages square and round bales in an equally clean and air-tight manner.

SECURE BALE GUIDING

The rotation rollers arranged on both sides are connected to each other with tie rods. This produces a forced control that generates a clamping effect on the bales in conjunction with the conveyor belt. The wrapper achieves secure bale guiding even with rectangular bale dimensions. A quick adjustment adapts the conveyor belt length to the bale dimensions.

The user-friendly STANDARD program control with wireless operation and joystick

CONTROL STANDARD

A genuine highlight is the user-friendly and easy-to-use program control STANDARD with wireless operation and electronic joystick.

The continuous bale conveyor belt guarantees uniform wrapping of each and every bale.

CONTINUOUS BALE CONVEYOR BELT

The wide, continuous bale conveyor belt guarantees uniform wrapping of each and every bale - even if it is misshapen.

The feed rate shut-off valve provides for an accurate overlap of the film.

FEED RATE SHUT-OFF VALVE

This ensures that the film will overlap accurately for rectangular bales.

The G3010 Q Exclusiv is equipped with a hydraulic bale pick-up designed for square and round bales.

HYDRAULIC BALE PICK-UP

The G3010 Q Exclusiv is equipped with a hydraulic bale pick-up designed for square and round bales. The bales are picked up on the right against the direction of travel.

8.2 kW Honda gasoline engine including battery, generator and electric starter as well as hydraulic system

MOTOR

An 8.2 kW gasoline engine including battery, generator and electric starter as well as hydraulic system is available as an option.

Basic model

Single wrapping arm

Hydraulically tilting wrapping table with mechanical belt length adjustment

This ensures that the film will overlap accurately for rectangular bales

Bale pick-up for square and round bales

Bale pick-up on the right against the direction of travel

Bale deposit on the left

Combined film stretching unit 500 mm and 750 mm

Automatic film cutting and holding system

Wide, continuous bale conveyor belt with belt guide and 2 bale guide rollers

Three-point linkage Cat. II

Working headlight

"Bale pick-up" is controlled manually using the electronic joystick.
The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button.

Technical data (basic model)

Weight:1,150 kg
Length:3,000 mm
Width:1,680 mm
Height:2,590 mm

For all bale dimensions:

up to  1.20 x 1.40 m

Bale length:up to 1.60 m
Round bale diameter:0.90 - 1.50 m
Oil requirement:

20 liters/min at least

 

Required connections

1 pressure connection and one depressurized return for the supply of the wrapper

3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)

 

Additional equipment

The execution of all work cycles is fully automatic

Only in combination with fully automatic program control PROFI

Stops the wrapping process if film tears or runs out

Additional bale guide roller

Light and indicator system

Including a 4 kW electric motor with pump, return filter and 30 L hydraulic oil tank

Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank

8.2 kW including battery, generator and electric starter as well as hydraulic system fully assembled

Battery supply cable 5.3 meters 2x6 mm² with 3-pin power outlet

FacebookYoutubeInstagram