Compared to its sibling, the G3010 Standard, the three-point linkage machine with bale pick-up stands out with its hydraulic bale pick-up. The cycles "wrapping process" and "film-holding and cutting" are started automatically using the STANDARD program control with wireless operation. The bales are dropped off with the push of a button.
The low profile as well as the robust and solid construction and workmanship of the wrappers guarantee an exceptionally long lifetime. The conveyor belts and the two rotating bale guide rollers guarantee that the bale will continually move forward and, consequently, ensure a uniform overlap of the film.
The wrapping arm is equipped with a film stretching unit that can accommodate 750 mm rolls of film. The three patented plastic rollers provide for perfectly uniform stretching.
What is more, the rollers are not sensitive to temperature. This helps save film and guarantees firmly wrapped bales. The quick-release system makes it possible to change empty rolls quickly and effortlessly.
"Bale pick-up" is controlled manually using the electronic joystick.
The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button
|880 kg (1,940 lbs)|
|2,705 mm (8’ 11”)|
|1,825 mm (6’)|
|2,670 mm (8’ 9”)|
|0.90 – 1.60 m (36” - 63”)|
starting at 20 liters/min at max. 190 bar
|Bale weight:||up to 1,800 kg (up to 4,000 lbs)|
|Bale weight with pick up:||up to 1,100 kg (up to 2,400 lbs)|
1 pressure connection and one depressurized return for the supply of the wrapper
3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm2)
The execution of all work cycles is fully automatic
Only in combination with fully automatic program control PROFI
Required connection: 3-pin power outlet for the electrical supply of the hand-held terminal
(12 V / 10 A)
For film widths between 500 mm and 750 mm (20” and 30”); the overlap can be adjusted as well.
Stops the wrapping process if film tears or runs out.
maximum 2 items
Required connection: 7-pin power outlet for the entire lighting
system (excluding work lights)
Required connection for electric motor: 400 V/50 Hz, CEE 16 A, protection class IP55
Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank
8.2 kW including battery, generator and electric starter as well as hydraulic system fully assembled