The bale is wrapped in a swift and air-tight manner.

Stationary round bale wrapper with remote control
G3010 Farmer | Round bale wrapper

The G3010 Farmer is a round bale wrapper with remote control and combines efficiency and comfort. The adjustable hydraulic articulated drawbar and compact design allow the wrapping machine to be transported with almost any towing vehicle. The integrated motor and ease of operation make the G3010 Farmer the ideal wrapper for one-man operation.

  

    Highlights

    Design

    The Series G30 wrappers are particularly characterized by their low working height. The robust and solid design and workmanship of the wrapper guarantee a long service life.

     

    Wrapping arm with film pre-stretcher

    The wrapping arm comes with a film pre-stretcher for 750 mm film rolls. The patented plastic rollers ensure uniform pre-stretching. This saves film and guarantees tightly wrapped and airtight bales. In addition, the rollers are not temperature sensitive. The quick-change system allows empty rolls to be replaced quickly and easily.

     

    Rotating wrapping arm with stationary wrapping table

    It is impossible for the bale to fall off with this system as there are no centrifugal forces acting on it. While the belts ensure continuous rotation of the bale, the two rotating bale guide rollers (optionally up to four) keep the bale in position. This guarantees uniform overlapping of the film. When bale deposit is performed, the wrapping table is tilted to the side and the bale is gently deposited next to the machine.

     

    Film Cutter

    The stainless steel cutting knife guarantees clean and precise cutting of the film. At the same time, the film is fixed by the cutting lever. Shortly after the start of the wrapping process, the standard float position ensures easy release of the wrapping film.

     

    Control unit with hand lever

    The control unit and the hand lever are helpful for maintenance and service work. All functions and processes can be performed directly on the machine. This means that the operator can simply leave the handset in the tractor cab.

     

    Drawbar & axle

    The hydraulically adjustable lift axle and articulated drawbar allow the G3010 Farmer and Profi machines to be pulled and parked in work position. The wrappers can be easily loaded with a transport fork due to their low height. A front loader is not required.

     

    Film Magazine

    It is extremely important to have enough film on long workdays. With the G3010 Farmer, up to four rolls of film can be transported, and up to 16 with the G3010 Profi. The holders are located on the rear side of the wrapper at a comfortable working height.

     

    Basic model

     (without hydraulic oil)

    • 8.2 kW gasoline engine with battery
    • Electric starter
    • Return filter
    • 30 l hydraulic oil tank

    The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button

     

    Info & Contact

    Technical Data (Basic model)

    Weight:

    1,450 kg (3,200 lbs)

    Length:

    5,260 mm (17’ 3”)

    Width:

    1,950 mm (6’ 5”)

    Height:

    2,990 mm (9’ 10”) (with the lift axle extended)

    Bale diameter:

    0.90 – 1.60 m (36” - 63”)

    Oil requirement

    Self-sufficient oil supply

    Bale weightup to 1,800 kg (up to 4,000 lbs)

     

    Required connections

    7-pin power outlet for the entire lighting system (excluding work lights)

    Additional equipment

    Width altered to 7’

     

    For film widths between 500 mm and 750 mm (20” and 30”); the overlap can be adjusted as well

     

    Stops the wrapping process if film tears or runs out

     

    maximum 2 items

     

    Customers can choose from a large selection of drawbar eye types

    All Drawbar Eye Types