This three-point linkage machine without bale pick-up is distinguished by its robust design as well as its low working height and ease of use. Four conveyor belts guarantee uniform wrapping of each and every bale - even if soft and misshapen!
The low profile as well as the robust and solid construction and workmanship of the wrappers guarantee an exceptionally long lifetime. The conveyor belts and the two rotating bale guide rollers guarantee that the bale will continually move forward and, consequently, ensure a uniform overlap of the film.
The wrapping arm is equipped with a film stretching unit that can accommodate 750 mm rolls of film. The three patented plastic rollers provide for perfectly uniform stretching.
What is more, the rollers are not sensitive to temperature. This helps save film and guarantees firmly wrapped bales. The quick-release system makes it possible to change empty rolls quickly and effortlessly.
Weight: | 680 kg (1,500 lbs) |
Length: | 2,750 mm (8’ 11”) |
Width: | 1,720 mm (5’ 8”) |
Height: | 2,670 mm (8’ 9”) |
Bale diameter: | 0.90 – 1.60 m (36” - 63”) |
Oil requirement: | starting at 20 liters/min at max. 190 bar |
Bale weight | up to 1,800 kg (up to 4,000 lbs) |
1 pressure connection and 1 depressurized return for the supply of the wrapper |
With wrapping arm rotation and bale counter. The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button.
Only in combination with automatic film cutting and holding system.
Required connection: 3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)
With wrapping arm rotation and bale counter. The execution of all work cycles is fully automatic.
Only in combination with automatic film cutting and holding system
Required connection: 3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)
Only in combination with fully automatic program control PROFI
Required connection: 3-pin power outlet for the electrical supply of the hand-held terminal
(12V/10A)
Required connection: 3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)
For film widths between 500 mm and 750 mm (20” and 30”) – the overlap can be adjusted as well.
Only in connection with Standard or Profi program control
Stops the wrapping process if film tears or runs out.
Only in connection with Standard or Profi program control
Required connection: 7-pin power outlet for the entire lighting system (excluding work lightss)
4 kW electric motor, return filter and 30 l hydraulic oil tank, fully assembled
Required connection for electric motor: 400 V / 50 Hz, CEE 16 A, protection class IP55
Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank