#ifarmitmyway
Forklift bucket
GHS 12 | High Lift Bucket
Payload up to 5,000 kg
Our tried-and-true high lift bucket with forklift attachment and HARDOX scraping bar for use in commercial applications is the perfect solution for tough and demanding jobs!
Highlights
Stacker attachment
We also offer models of our tried-and-tested high dump bucket that are specially designed for stackers used in commercial applications.
Body
The body is reinforced by additional cast parts at the top corner joints and at the sidewalls. These reinforcements let the rear bucket withstand even greater loads. The upper edge has been enhanced by a round steel pipe. Lashing points arranged on the side allow you to attach belts.
Swinging sidewall
Formed by a sidewall profile, the swinging sidewall will stand up to even greater loads.
Bucket bottom
The flat bucket bottom makes it a cinch to load the GHU/GHK.
The high dump effect
The design of the high lift bucket provides for a maximum dumping height.
Additional Equipment
A large variety of additional equipment options makes it a breeze to customize the GHU/GHK to your specific needs.
Upright, safely protected telescopic cylinder
Not only is the upright telescopic cylinder perfectly protected and integrated into the 3-point frame, it also delivers a level of strength that is truly exceptional. It can handle any load you throw at it!
Open 3-point frame
Ideal for leveling surfaces or clearing snow. No material will stick to the frame!
Take advantage of our demonstration service and see for yourself.
Video of the high lift bucket
Basic Model
Body with forklift attachment via forks
Double-acting 2-stage telescopic cylinder
Flat bucket bottom with welded-on scraper bar made from HARDOX 500
Removable swinging tailgate
Technical data (Basic model)
| Bucket depth | 1,200 mm |
| Front / side wall height | 700 mm |
| Payload | up to 5,000 kg |
Model
| Model | Bucket width | Weight |
| GHS 12/2000 | 2,200 mm | 461 kg |
| GHS 12/2200 | 2,200 mm | 480 kg |
| GHS 12/2350 | 2,350 mm | 494 kg |
| GHS 12/2500 | 2,500 mm | 503 kg |
Additional equipment
Swivel device
Straightforward installation, can be fitted and removed with ease and without the use of tools, increases the height of the front panel by 450 mm (18”), can still be used as a trough extension
Sidewall extension
Consisting of 2 side sections, front panel and one holder for
the sidewall
Additional height of 350 mm (14”)
Additional swinging tailgate
Bucket width: 2,000 mm (86”), 2,200 mm (98”)
Bucket width: 2,350 mm (86”), 2,500 mm (98”)
Connecting strip
For connecting the additional swinging tailgate to a standard swinging tailgate
Plug stanchions (1 pair)
Height: 500 mm
simple installation (can be slipped on or removed without the use of tools)
FAQ - Frequently asked questions
How does the sidewall extension work on the GHU 10 hgh tip bucket?
The sidewall extension consists of two side sections, the end wall, and a bracket for the sidewall extension. When installed, it provides an additional 350 mm of height.
What material is the scraper bar of the GHU 10 made of?
The GHU 10 high lift bucket is equipped with a welded-on scraper bar made of Hardox 500 . This abrasion-resistant steel is particularly well-suited for applications that require high wear resistance .
