#ifarmitmyway
High tip bucket
GHU 10 | High Lift Bucket
From 40-100 HP | payload up to 3,500 kg
Whether you use it for commercial, agricultural or silvicultural applications – the GHU 10 is not only the Jack of all Trades but also the Master of All among the high lift buckets made by GÖWEIL
Highlights
Stacker attachment
We also offer models of our tried-and-tested high dump bucket that are specially designed for stackers used in commercial applications.
Body
The body is reinforced by additional cast parts at the top corner joints and at the sidewalls. These reinforcements let the rear bucket withstand even greater loads. The upper edge has been enhanced by a round steel pipe. Lashing points arranged on the side allow you to attach belts.
Swinging sidewall
Formed by a sidewall profile, the swinging sidewall will stand up to even greater loads.
Bucket bottom
The flat bucket bottom makes it a cinch to load the GHU/GHK.
The high dump effect
The design of the high lift bucket provides for a maximum dumping height.
Additional Equipment
A large variety of additional equipment options makes it a breeze to customize the GHU/GHK to your specific needs.
Upright, safely protected telescopic cylinder
Not only is the upright telescopic cylinder perfectly protected and integrated into the 3-point frame, it also delivers a level of strength that is truly exceptional. It can handle any load you throw at it!
Open 3-point frame
Ideal for leveling surfaces or clearing snow. No material will stick to the frame!
Take advantage of our demonstration service and see for yourself.
Video of the high lift bucket
Basic Model
Body with Cat. I and II three-point linkage
Single or double-acting 2-stage telescopic cylinder upright in three-point frame
Torsion springs
for quick lowering into end position including automatic end position locking in single-acting version
Flat bucket bottom with welded-on scraper bar made from HARDOX 500
Removable swinging tailgate
Technical data (Basic model)
| Bucket depth | 1,000 mm |
| Front / side wall height | 600 mm |
| Power requirement | 30 – 75 kW (~ 40 – 100 HP) |
| Payload | up to 3,500 kg |
Model
| Model | Bucket width | Weight |
| GHU 10/1400 | 1,400 mm | 315 kg |
| GHU 10/1700 | 1,700 mm | 333 kg |
| GHU 10/1850 | 1,850 mm | 342 kg |
| GHU 10/2000 | 2,000 mm | 384 kg |
| GHU 10/2200 | 2,200 mm | 398 kg |
Possible attachments
| Euro-attachment Simple installation thanks to bolted attachment Three-point linkage remains fully usable 2-stage locking latches ensure a better Angle of inclination and therefore greater bulk material pick-up |
| Weidemann hydr. |
| Kramer |
| Cat. II Weiste-Triangle, Thaler |
| Skid Steer |
| Bobcat |
| Hauer B |
| Other attachments: Overview Mounting options |
Additional equipment
Swivel device
Straightforward installation, can be fitted and removed with ease and without the use of tools, increases the height of the front panel by 450 mm (18”), can still be used as a trough extension
Sidewall extension
Consisting of 2 side sections, front panel and one holder for
the sidewall
Additional height of 350 mm (14”)
Additional swinging tailgate
Bucket width: 1,400 mm, 1,700 mm, 1,850 mm
Blade width: 2,000 mm (86”), 2,200 mm (98”)
Holder for Hand Tools
For 3 pieces, up to 50 mm in diameter
Connecting strip
For connecting the additional swinging tailgate to a standard swinging tailgate
Plug stanchions (1 pair)
Height: 500 mm
simple installation (can be slipped on or removed without the use of tools)
LED Light and indicator system
The telescoping light and flashing system is visible in the transport position and protected behind the bucket in the work position.
Required connection: 7-pin power outlet for the entire
lighting system.
FAQ - Frequently asked questions
How does the sidewall extension work on the GHU 10 high tip bucket?
The sidewall extension consists of two side panels, the end wall, and a bracket for the side panel. When installed, it provides an additional height of 350 mm.
What material is the scraper bar on the GHU 10 made of?
The GHU 10 high lift bucket is equipped with a welded-on scraper bar made of Hardox 500 . This abrasion-resistant steel is particularly well-suited for applications that require high wear resistance .
