#ifarmitmyway
High dump bucket
GHU 08 | High Lift Bucket
For tractors with 15 – 60 HP | Payload up to 2,400 kg
The GHU 08 high lift bucket is the ideal machine for minor jobs in agriculture as well as small transports and light-duty yard work.
Highlights
Body
The body is reinforced by additional cast parts at the top corner joints and at the sidewalls. These reinforcements let the rear bucket withstand even greater loads. The upper edge has been enhanced by a round steel pipe. Lashing points arranged on the side allow you to attach belts.
Swinging sidewall
Formed by a sidewall profile, the swinging sidewall will stand up to even greater loads.
Bucket bottom
The flat bucket bottom makes it a cinch to load the GHU/GHK.
The high dump effect
The design of the high lift bucket provides for a maximum dumping height.
Additional Equipment
A large variety of additional equipment options makes it a breeze to customize the GHU/GHK to your specific needs.
Upright, safely protected telescopic cylinder
Not only is the upright telescopic cylinder perfectly protected and integrated into the 3-point frame, it also delivers a level of strength that is truly exceptional. It can handle any load you throw at it!
Open 3-point frame
Ideal for leveling surfaces or clearing snow. No material will stick to the frame!
Take advantage of our demonstration service and see for yourself.
Video of the high lift bucket
Basic Model
Body with Cat. I three-point linkage
Single or double-acting 2-stage telescopic cylinder upright in three-point frame
Torsion springs
for quick lowering into end position including automatic end position locking in single-acting version
Flat bucket bottom with welded-on scraper bar made from HARDOX 500
Removable swinging tailgate
Technical data (Basic model)
| Bucket depth | 800 mm |
| Front / side wall height | 600 mm |
| Power requirement | 10 – 45 kW (~ 15 – 60 HP) |
| Payload | up to 2,400 kg |
Model
| Model | Bucket width | Weight |
| GHU 08/1200 | 1,200 mm | 236 kg |
| GHU 08/1400 | 1,400 mm | 247 kg |
| GHU 08/1550 | 1,550 mm | 255 kg |
| GHU 08/1700 | 1,700 mm | 263 kg |
| GHU 08/1850 | 1,850 mm | 271 kg |
| GHU 08/2000 | 2,000 mm | 279 kg |
| GHU 08/2200 | 2,200 mm | 291 kg |
Possible attachments
| Three-point linkage Cat. II |
| Euro-attachment including Cat. II Attachment (Simple installation thanks to bolted attachment Three-point linkage remains fully usable 2-stage locking latches ensure a better angle of inclination and therefore greater bulk material pick-up) |
| Weidemann hydr. |
| Skid Steer |
| Adapter Weiste triangle Cat. 0 communal adapter Weiste triangle Cat. II |
| Hauer B |
| Other attachments: Overview Mounting options |
Additional equipment
Swivel device
Straightforward installation, can be fitted and removed with ease and without the use of tools, increases the height of the front panel by 450 mm (18”), can still be used as a trough extension
Sidewall extension
Consisting of 2 side sections, front panel and one holder for
the sidewall
Additional height of 350 mm (14”)
Additional swinging tailgate
Bucket width: 1,200 mm (86”)- 1,850 mm (98”)
Bucket width: 2,000 mm (86”), 2,200 mm (98”)
Connecting strip
For connecting the additional swinging tailgate to the standard swinging tailgate
Plug stanchions (1 pair)
Height: 500 mm
simple installation (can be slipped on or removed without the use of tools)
FAQ - Frequently asked questions
Does the GHU 08 also come with a single-acting cylinder?
Yes, the GHU 08 can be equipped with a single or double-acting cylinder depending on your needs.
What is the swivel device for on the GHU 08?
The swivel device can be attached easily without tools and serves either to increase the height of the end wall or as a body extension.
