#ifarmitmyway
G1015 | Round bale wrapper
The G1015 round bale roller wrapper made by GÖWEIL sets itself apart with its ultra compact and sturdy design. Two rollers actuated in series ensure that the bale is rotated evenly. The STANDARD program control including joystick can be used to control the round bale roller wrapper with no effort at all.
Highlights
Transport, wrap, stack
The G1015 roller wrapper makes it possible to perform the cycles "Transport", "Wrap" and "Stack" with one single machine. And, thanks to its exceptionally sturdy and compact design, it is guaranteed to have a long service life. The wrapper is suitable for both front and rear installation. Customers can choose from an extensive selection of loader attachments.
Control system
The G1015 wrapper comes standards with the easy-to-use STANDARD program control that includes an electronic joystick. All functions can also be executed directly at the control housing of the machine – which comes in handy when the operator needs to change the film. Better still, additional connections make it possible to use the wrapper's program control to also actuate the hydraulic upper linkage.
Hydraulic cylinders and hydraulic motors
The hydraulic cylinders housed in the base frame of the wrapper and the hydraulic motors are safely protected. The hydraulic motors are mounted on the inside of the rollers.
Rollers
The large rollers of the G1015 wrapper ensure that even heavy bales can be wrapped with ease. Powered separately from one another, the rollers stretch the film around the bales in a uniform movement.
Wrapping arm with film pre-stretcher
The wrapping arm is equipped with a film pre-stretcher that can accommodate 750 mm rolls of film. The three patented plastic rollers provide for perfectly uniform stretching.
What is more, the rollers are not sensitive to temperature. This helps save film and guarantees firmly wrapped bales. The quick-release system makes it possible to change empty rolls quickly and
effortlessly.
Hydraulic upper linkage
The pitch of the wrapper can be adjusted continuously and with perfect ease thanks to the hydraulic upper linkage. Optional connections for the upper linkage make it possible to control the upper linkage with the wrapper’s program control.
Film cutter
The stainless steel knife guarantees that the film will be cut cleanly and precisely. At the same time, the film is fixed in place by the cutter lever. Shortly after the wrapping process begins, the standard float position ensures that the film will unwind easily.
Additional Equipment
A host of additional equipment options allow the user to customize and expand the machine to their individual needs.
Reermann Agrarservice in action with two G-1 F125 Kombi units
A powerful one-two punch in forage harvesting: The Reermann Agrarservice contracting company from Brilon serves its customers with two GÖWEIL baler-wrapper combinations. Although there is a wide selection of round balers available, the service provider deliberately chose the blue machines from Austria. In this video, we’ll take a look with you at how this came about and what the technology is capable of under these demanding, continuous operating conditions. Come along and join the forage harvesting pros from the Sauerland region as they go about their work!
“We decided to go with the GÖWEIL wrapper again, and this time with the baler built in – which, from a technical standpoint, totally blew us away!”
Stefan Reermann
Agricultural Service Specialist from the Sauerland region
Video of the G1015
Basic Model
Load-Sensing
can also be operated in conjunction with tractors without load sensing pump
Single wrapping arm
Cat. II and Cat. III three-point linkage
Hydraulically swiveling roller arms for picking up and depositing the bales
2 bale guide rollers
Film stretching unit 750 mm (30”)
Film cutter precision cut
Storage for 1 roll of film
LED work lights
Program control STANDARD
Bale pick-up and deposit are controlled using the electronic joystick. The cycles “wrapping process”
and “film-holding and cutting” start automatically.
Technical data
(Basic model)
| Weight | 985 kg |
| Length | 2,220 mm |
| Width | 1,800 mm |
| Height | 2,355 mm |
| Roller opening width | 1,750 mm |
| Bale diameters | 0,90 – 1,60 m (36” – 63”) |
| Oil requirement | from 20 l/min at max. 190 bar |
| Bale weight | up to 1,200 kg (2,200 lbs) |
Required connections
| 1 pressure connection and one depressurized return for the supply of the wrapper |
| Load Sensing connection (required for LS mode only) |
| 3-pin socket for the electrical supply with direct supply to the battery (12V/30A) cable cross-section 2×6 mm² |
Possible attachments
| Euro-attachment |
| Merlo, Dieci Dedalus, Weidemann hydr., Kramer, Schäffer small, Faucheux, Giant, Genie |
| Merlo ZM3, SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier, Schäffer large, Claas Scorpion, Zettelmeyer 402, Zettelmeyer 602, Faresin, CAT TH 407 C, Skid Steer, Liebherr L514 |
| Manitou, JCB Q-Fit, Atlas, CAT 907H / Liebherr L507, Fendt Cargo T955/Sennebogen, Volvo BM, Matbro Pin&Cone |
| Bobcat |
Other attachments: Overview Mounting options |
Additional equipment
Film monitoring
Stops the wrapping process if film tears or runs out
Connections for hydraulic upper linkage
The hydraulic upper linkage is controlled directly using the program control of the wrapper
Support roller
Length changes to: 2,370 mm (7’ 9”) / height changes to: 2,505 mm
Bale tipper
Operation via program control
Remote control RC2026
With 8 buttons
Counterweight
approx. 60 kg
Battery supply cable 5.3 meters 2 x 6 mm² with 3-pin power socket
Light package – LED lighting system with reflectors and additional film storage for a total of 2 rolls of film
PTO drive shaft (without hydraulic oil)
Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank
FAQ - Frequently asked questions
What equipment does my tractor need for the G1015?
The following connections are required to transport the G1015 wrapping machine:
1. 1 pressure connection and 1 depressurized return for supplying the wrapping machine
2. Load sensing connection (required for LS mode only)
3. 3-pin socket for the electrical supply with direct supply to the battery (12V/30A), cable cross-section 2×6 mm²
Oil requirements: from 20 l/min at max. 190 bar
Is there a version of the G1015 with a twin wrapping arm?
No, the twin wrapping arm is only available for the G5012, G5020 and G5020 Inliner.
Can the G1015 also be operated without load sensing?
Yes, the G1015 wrapping machine can also be operated with tractors without a load sensing pump.
What is the minimum bale size that can be processed by the G1015?
The bale diameter is 0.90 – 1.60 m.
