#ifarmitmyway
High dump bucket
GHU 12 | High Lift Bucket
80 HP or more | payload up to 5,000 kg
Equipped with a HARDOX scraper bar, the GHU 12 high lift bucket is the perfect tool for any tough and demanding job!
Highlights
Stacker attachment
We also offer models of our tried-and-tested high dump bucket that are specially designed for stackers used in commercial applications.
Body
The body is reinforced by additional cast parts at the top corner joints and at the sidewalls. These reinforcements let the rear bucket withstand even greater loads. The upper edge has been enhanced by a round steel pipe. Lashing points arranged on the side allow you to attach belts.
Swinging sidewall
Formed by a sidewall profile, the swinging sidewall will stand up to even greater loads.
Bucket bottom
The flat bucket bottom makes it a cinch to load the GHU/GHK.
The high dump effect
The design of the high lift bucket provides for a maximum dumping height.
Additional Equipment
A large variety of additional equipment options makes it a breeze to customize the GHU/GHK to your specific needs.
Upright, safely protected telescopic cylinder
Not only is the upright telescopic cylinder perfectly protected and integrated into the 3-point frame, it also delivers a level of strength that is truly exceptional. It can handle any load you throw at it!
Open 3-point frame
Ideal for leveling surfaces or clearing snow. No material will stick to the frame!
Take advantage of our demonstration service and see for yourself.
Video of the high lift bucket
Basic Model
Body with Cat. I and II three-point linkage
Double-acting 3-stage telescopic cylinder, upright in threepoint frame
Flat bucket bottom with welded-on scraper bar made from HARDOX 500
Removable swinging tailgate
Technical data (Basic model)
| Bucket depth | 1,200 mm |
| Front / side wall height | 700 mm |
| Power requirement | From 60 kW (~80 HP) |
| Payload | up to 5,000 kg |
Model
| Model | Bucket width | Weight |
| GHU 12/2000 | 2,000 mm | 526 kg |
| GHU 12/2200 | 2,200 mm | 545 kg |
| GHU 12/2350 | 2,350 mm | 559 kg |
| GHU 12/2500 | 2,500 mm | 567 kg |
Possible attachments
| Euro-attachment Simple installation thanks to bolted attachment Three-point linkage remains fully usable 2-stage locking latches ensure a better Angle of inclination and therefore greater bulk material pick-up |
| Weidemann hydr. |
| Manitou, Kramer, CAT 907H / Liebherr L507 |
| Cat. II Weiste-Triangle |
| JCB Q-Fit, Bobcat |
| Liebherr L514 |
| Hauer B |
| Other attachments: Overview Mounting options |
Additional equipment
Swivel device
Straightforward installation, can be fitted and removed with ease and without the use of tools, increases the height of the front panel by 450 mm (18”), can still be used as a trough extension
Sidewall extension
Consisting of 2 side sections, front panel and one holder for
the sidewall
Additional height of 350 mm (14”)
Additional swinging tailgate
Bucket width: 2,000 mm (86”), 2,200 mm (98”)
Bucket width: 2,350 mm (86”), 2,500 mm (98”)
Holder for Hand Tools
For 3 pieces, up to 50 mm in diameter
Connecting strip
for connecting the additional swinging tailgate to a standard swinging tailgate
Plug stanchions (1 pair)
Height: 500 mm
simple installation (can be slipped on or removed without the use of tools)
LED Light and indicator system
The telescoping light and flashing system is visible in the transport position and is protected behind the bucket in the work position.
Required connection: 7-pin power outlet for the entire
lighting system.
FAQ - Frequently asked questions
In which sizes is the GHU 12 available?
The GHU 12 is available in the following standard sizes:
GHU 12/2000
Bucket width: 2,000 mm
Weight: 526 kg
GHU 12/2200
Bucket width: 2,200 mm
Weight: 545 kg
GHU 12/2350
Bucket width: 2,350 mm
Weight: 559 kg
GHU 12/2500
Bucket width: 2,500 mm
Weight: 567 kg
How does the Euro-attachment work on the GHU 12?
With the Euro-attachment, 2-stage locking latches ensure a better angle of inclination and therefore greater bulk material pick-up. The three-point linkage remains fully usable.
