#ifarmitmyway
Pallet wrapper | G1010
The G1010 pallet wrapper is the perfect device for transporting, wrapping and loading palletized goods. The machine is the best tool for packaging rolls of grass sod. The G1010 pallet wrapper's design has taken several clues from our tried-and-tested round bale wrapping technology. What is more, the G1010 pallet wrapper comes with a wide selection of loader attachments.
Highlights
Pickup and transport
With the G1010 pallet wrapper, you can transport, wrap and load full pallets, all with a single vehicle. The pallets are picked up with ordinary forks. During transport, the film cutting and wrapping system is folded up and out of the way. The tines can be inserted all the way under the pallet, until the pallet rests against the load backrest. As a result, the load is very close to the tractor. And thanks to the side-positioned upper frame section, the driver always has a clear view of the pallet.
Hydraulically movable transport carriage
Another standout feature is the hydraulically actuated film stretching unit. Moving 600 mm up and down during wrapping, the unit is capable of using a 750 mm film to fully wrap a pallet with a height of 1,350 mm.
Program control PROFI
The wrapper is equipped with the program control PROFI. This control allows the operator to conveniently execute all work cycles and functions from the cab. All work steps can be performed manually and in fully automatic fashion.
Forks
The G1010 pallet wrapper is fitted with the standard ISO 3B mount for the forks. With its 1400 mm forks, picking up and transporting pallets is easy. With its 1400 mm forks, picking up and transporting pallets is easy. Other available options are 2200 mm forks or telescoping tines (1300 mm long, extensible by 950 mm).
Hydraulic foldable film cutting and wrapping system
The hydraulically actuated film cutting and wrapping system folds down before wrapping starts. The pallet is lowered to the pallet stop, and wrapping can begin. After the last turn in the wrapping process, the system folds up, cuts the film off cleanly and secures it in place. The cutting and wrapping system folds up and out of the way to make pallet transport easier.
Video of the G1010
Basic Model
(without attachment)
Load-Sensing
can also be operated in conjunction with tractors without load sensing pump
Single wrapping arm
Hydraulic foldable film cutting and wrapping system
Film pre-stretcher combined
For film widths between 500 mm and 750 mm (20” and 30”); the overlap can be adjusted as well
Film monitoring
Stops the wrapping process if film tears or runs out
Hydraulically movable transport carriage
Height adjustment: 600 mm (2’)
Standardized fork tine mount: ISO 3B
Fork tine length: 1,400 mm
LED work lights
Fully automatic program control PROFI
All work steps can be performed manually and in fully automatic
fashion
Your contact
Technical data
(Basic model)
| Weight | 760 kg |
| Length | 2,000 mm |
| Width | 1,400 mm |
| Height | 2,240 mm |
| Pallet size: | max. 1,350 x 1,350 mm |
| Pallet height: | max. 1,700 mm (63”) |
| Oil requirement | from 25 l/ min. at max. 190 bar |
| Pallet weight: | up to 2,000 kg (2,200 lbs) |
Required connections
| 1 pressure connection and one depressurized return for the supply of the wrapper |
| Load Sensing connection (required for LS mode only) |
| 3-pin socket for the electrical supply with direct supply to the battery (12V/30A), cable cross-section 2×6 mm² |
Possible attachments
| Euro-attachment |
| Merlo, Weidemann hydr., Kramer, Schäffer small, Faucheux, Giant, Genie |
| SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier, Schäffer big,Claas Scorpion, Zettelmeyer 602, CAT 907H / Liebherr L507, Liebherr L514, Skid Steer,Merlo ZM3, Faresin, CAT TH 407 C |
| JCB Q-Fit, Atlas, Volvo BM, Fendt Cargo T955/Sennebogen, Forklift-attachment ISO II, Manitou, Cat. II and Cat. III three-point linkage, Matbro Pin&Cone |
| Amkodor, Bobcat |
Other attachments: Overview Mounting options |
Additional equipment
Radio remote control
Required connection: 3-pin socket for electrical supply of the
hand-held terminal 12 V / 10 A)
Fork tine length: 2,200 mm
Telescoping fork tines – Length: 1300 mm long, extensible by 950 mm
Camera system
For a better overview in the area of the fork tines and film cutter
Required connection: 12-Volt Combination Connector DIN ISO 4165
Splash guard
Especially for operation with wheel loader or telescopic loader
Battery supply cable 5.3 meters 2 x 6 mm² with 3-pin power socket
FAQ - Frequently asked questions
What kinds of items can I pack with the G1010?
The G1010 pallet wrapper is the perfect device for transporting, wrapping and loading palletized goods. The wrapper is very popular for packaging rolls of turf.
For which loaders is the G1010 pallet wrapper suitable?
The G1010 is compatible with all standard chargers.
Our possible attachments:
| Euro-attachment |
| Merlo, Weidemann hydr., Kramer, Schäffer small, Faucheux, Giant, Genie |
| SMS, MX, Dieci/New Holland, JCB Compact Tool Carrier, Schäffer big,Claas Scorpion, Zettelmeyer 602, CAT 907H / Liebherr L507, Liebherr L514, Skid Steer,Merlo ZM3, Faresin, CAT TH 407 C |
| JCB Q-Fit, Atlas, Volvo BM, Fendt Cargo T955/Sennebogen, Forklift-attachment ISO II, Manitou, Cat. II and Cat. III three-point linkage, Matbro Pin&Cone |
| Amkodor, Bobcat |
Other attachments – on request
Which connections do I need for the double transport frame?
The following connections are required to pallet wrapper the G1010 wrapping machine:
1 pressure connection and 1 depressurized return for the supply of the wrapper
– Load Sensing connection (required for LS mode only)
– 3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2×6 mm²)
