en
The RBS was designed especially for the purpose of cutting and transporting bales of silage, hay and straw.

Round bale Slicer | RBS

 

The RBS was designed specifically for the purpose of cutting and transporting bales of silage, hay and straw. This round bale slicer makes it a cinch to split bales up and distribute them as fodder. Apart from ensuring a reliable and strong cut, the serrated knife guarantees that the bale will be cut all the way through.

Highlights

Film holder

The film holder allows the operator to cleanly separate film and net from the fodder without the hassle of having to step down from the tractor. Eight hooks hold film and net safely in place while the bale is being cut through. This saves the operator the trouble of removing the film manually beforehand. Operation is controlled using a double-acting control device.

While the silage is being split, the film holder keeps film and net firmly in place.

Basic model

5 reinforced tines (Ø: 42 mm, length: 1,000 mm) (Ø: 1.5”, length: 39”)

Scraper bar made of HARDOX 500

Cat. I and Cat. II three-point linkage

Technical data (basic model)

L x W x H

1,350 x 1,789 x 1,030 mm (4' 5" x 5' 10" x 3' 4")

Weight:440 kg (970 lbs)
Bale weight:max. 1,800 kg (max. 4,000 lbs)
Height with cutting lever:

1,720 mm (5' 7")

Max. opening area:

1,520 mm (60”)

Max. operating pressure:

200 bar

Bale diameter:

0,90 - 1,60 m (36” - 63”)

Mounting options

Euro capture frame

Hauer B, Merlo, Merlo ZM3, SMS, MX

Dieci, Amkodor, Manitou, JCB Q-Fit, Weidemann hydraulic, Kramer, Schäffer up to 3550, Schäffer from 3550T, Claas Scorpion, Zettelmeyer 602, Volvo BM, CAT 907H/ Liebherr L507, Faucheux, Bobcat

Adapter Weiste triangle Cat. II

Other mounting options available on request

Overview Mounting options »

Required connections

Double-acting hydraulic control device

 

Additional equipment

telescopic/wheel loaders require an operating pressure greater than 200 bar

Film/net is separated from the bale without the need to climb down from the tractor; fixes the net and the film in place across the entire width by means of 8 hooks – machines made in 2002 or later can be retrofitted with the film holder, weight: 52 kg (115 lbs)

2 additional tines

FacebookYoutubeInstagram Contact now