The G3010 Farmer combines efficiency and comfort. The adjustable hydraulic articulated drawbar and compact design allow the wrapping machine to be transported with almost any towing vehicle. The integrated motor and ease of operation make the G3010 Farmer the ideal wrapper for one-man operation.
The wrapping arm comes with a film stretching unit for 750 mm film rolls. The patented plastic rollers ensure uniform pre-stretching. This saves film and guarantees tightly wrapped and airtight bales. In addition, the rollers are not temperature sensitive. The quick-change system allows empty rolls to be replaced quickly and easily.
It is impossible for the bale to fall off with this system as there are no centrifugal forces acting on it. While the belts ensure continuous rotation of the bale, the two rotating bale guide rollers (optionally up to four) keep the bale in position. This guarantees uniform overlapping of the film. When bale deposit is performed, the wrapping table is tilted to the side and the bale is gently deposited next to the machine.
The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button
Weight: | 1,450 kg (3,200 lbs) |
Length: | 5,260 mm (17’ 3”) |
Width: | 1,950 mm (6’ 5”) |
Height: | 2,990 mm (9’ 10”) (with the lift axle extended) |
Bale diameter: | 0.90 – 1.60 m (36” - 63”) |
Oil requirement | Self-sufficient oil supply |
Bale weight | up to 1,800 kg (up to 4,000 lbs) |
7-pin power outlet for the entire lighting system (excluding work lights) |
Width altered to 2,130 mm (7’)
For film widths between 500 mm and 750 mm (20” and 30”); the overlap can be adjusted as well
Stops the wrapping process if film tears or runs out
maximum 2 items
Customers can choose from a large selection of drawbar eye types