The trailed round bale wrapper G5012 is furnished with a twin wrapping arm and a bale pick-up. This cuts the time that is necessary to wrap the bale in half! You will save time and money especially on long workdays. The G5012 is equipped with the STANDARD program control.
The robust and solid construction and the workmanship of the wrapper guarantee an exceptionally long lifetime. Its compact and wide design makes this round bale wrapper extremely agile and perfectly suited for slope positions. In addition, its low center of gravity allows for a level of maneuverability that is second to none. The standard 380/55-17AW tires ensure uniform weight distribution and are gentle on the sod.
This system reliably prevents the bale from falling off as it is not subjected to any kind of centrifugal forces. The conveyor belts and the four rotating bale guide rollers guarantee that the bale will continually move forward and, consequently, ensure a uniform overlap of the film. When it is time to drop the bales, the wrapping table is lowered all the way to the ground. This provides for a particularly gentle deposition of the bales.
The film stretching unit is designed to accommodate 750 mm rolls of film. Three patented plastic rollers provide for perfectly uniform stretching. What is more, the rollers are not sensitive to temperature. This property helps save film and guarantees that the bales will be wrapped firmly and in an air-tight manner. The wrapping arm is available in two sizes – an added bonus is that the stretching units are height-adjustable. This ensures that the bales will always be wrapped perfectly around their own center. The quick-release system makes it possible to change empty rolls quickly and effortlessly.
The machine is mounted on top of an offset axle. The work position has been shifted to the right, providing for perfect weight distribution.
- Perfect weight distribution especially during bale pick-up
- The wrapper can also be pulled by smaller tractors
- Excellent stability in slope positions
The hydraulically adjustable pivoting drawbar allows you to operate the machine with perfect ease – bale pick-up from the front in the baler's direction of travel, bale deposit towards the rear. The standard lower linkage link is responsible for the wrapper's outstanding agility. When forced to navigate tight spots on a field, the operator will appreciate the minimum turn radius as a decisive benefit!
The hydraulic loading armsoftly grabs the bale and places it gently on the wrapping table, which is slightly tilted forward while the bale is being picked up.
Since it can be adjusted to five different positions, the loading arm can be adapted perfectly to the diameter of the bale. Thanks to the pivoting, ball-mounted reception tube, the bale is never pinched or damaged. It also guarantees that the bale is picked up reliably even in difficult terrain. The bale pick-up also proves to be exceptionally convenient when you need to transport two bales.
For film widths between 500 mm and 750 mm; the overlap can be adjusted as well
Stops the wrapping process if film tears or runs out
Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank
Prevents the bale from dropping off the wrapping table in steep terrain
For a gentle bale drop onto the field
When the wrapping process is complete, the bale is positioned on its right front side with the direction of travel
"Bale pick-up" is controlled manually using the electronic joystick. The cycles "wrapping process" and "film-holding and cutting" start automatically, while “bale drop” starts at the push of a button.
0.90 – 1.50 m (with standard wrapping arm)
0.90 - 1.35 m (height altered to 2,760 mm)
20 liters/min at least
1 pressure connection and 1 depressurized return for the supply of the wrapper and 1 double-acting control device for the pivoting drawbar
3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)
7-pin power outlet for the entire lighting system (excluding working headlights)