This trailed machine with twin wrapping armandbale pick-up is the perfect machine for professionals who need to operate at multiple sites. Boasting a compact and agile construction, this wrapper is equipped as standard with the fully automatic PROFI program control. The pull-type G5020 wrapper is the must-have machine for every contract harvester!
The robust construction and quality craftmanship of the wrapper guarantee an exceptionally long lifetime. Its compact and wide design makes this round bale wrapper extremely agile and perfectly suited for working on slopes. In addition, its low center of gravity allows for a level of maneuverability that is second to none. The standard 380/55-17AW tires ensure uniform weight distribution and are gentle on the soil.
This system reliably prevents the bale from falling off as it is not subjected to any kind of centrifugal forces. The conveyor belts and the four rotating bale guide rollers guarantee that the bale will continually move forward and, consequently, ensure a uniform overlap of the film. When it is time to drop the bales, the wrapping table is lowered all the way to the ground. This provides for a particularly gentle unloading of the bales.
The film stretching unit is designed to accommodate 750 mm rolls of film. Three patented plastic rollers provide for perfectly uniform stretching. What is more, the rollers are not sensitive to temperature. This property helps save film and guarantees that the bales will be wrapped firmly and in an air-tight manner. The wrapping arm is available in two sizes – an added bonus is that the stretching units are height-adjustable. This ensures that the bales will always be wrapped perfectly around their own center. The quick-release system makes it possible to change empty rolls quickly and effortlessly.
The hydraulically adjustable pivoting drawbar allows you to operate the machine with perfect ease – bale pick-up from the front in the baler's direction of travel, bale deposit towards the rear. The standard lower linkage link is responsible for the wrapper's outstanding agility. When forced to navigate tight spots on a field, the operator will appreciate the minimum turn radius as a decisive benefit!
The hydraulic loading arm gently grabs the bale and places it smoothly on the wrapping table, which is slightly tilted forward while the bale is being picked up.
Since it can be adjusted to five different positions, the loading arm can be adapted perfectly to the diameter of the bale. Thanks to the pivoting, ball-mounted reception tube, the bale is never pinched or damaged. It also guarantees that the bale is picked up reliably even in difficult terrain. The bale pick-up also proves to be exceptionally convenient when you need to transport two bales.
The execution of all work cycles is fully automatic
0.90 – 1.50 m (with standard wrapping arm)
0.90 - 1.35 m (height altered to 2,760 mm)
starting at 20 L/min for standard hydraulics and at
1 pressure connection and 1 depressurized return for the supply of the wrapper
3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)
7-pin power outlet for the entire lighting system (excluding work lights)
Oil pressure and oil quantity are adjusted to consumption. This boosts energy efficiency and speed. The machine can also be operated in conjunction with tractors without load sensing pump.
For film widths between 500 mm and 750 mm; the overlap can be adjusted as well
Stops the wrapping process if film tears or runs out
Automatically switches to "single-film mode" as soon as one roll runs out.
During this process the feed rate is reduced to ensure an overlap of 50%. Only in conjunction with film monitoring unit.
Including gearbox with pump, slip-on tractor PTO drive shaft, return filter and 30 L hydraulic oil tank
When the wrapping process is complete, the bale will keep turning to allow the film to make better contact
Prevents the bale from dropping off the wrapping table in steep terrain
For a gentle bale drop onto the field
When the wrapping process is complete, the bale is positioned on its right front side with the direction of travel.