Square bale wrapper with bale pick-up
G3020 Q Profi | Square bale wrapper

Equipped with a bale pick-up mounted on the side, the square bale wrapper with bale pick-up G3020 Q Profi is the perfect square bale wrapper for use in the field. Thanks to the PROFI program control, the execution of all work cycles is fully automatic.



Secure Bale Guiding

The rotating rollers arranged on both sides are connected to each other with tie rods. This produces a controlled force, which in conjuntion with the belt, generates a clamping effect on the bales. The wrapper is able to guide the bale securely even with rectangular bale dimensions. A quick adjustment can adapt the belt length to different bale dimensions.

Control PROFI

A genuine highlight is the user-friendly and easy-to-use program control PROFI. The work steps are executed in fully automatic fashion. Manual control of all functions and parameters is still possible.


Continuous belt

The wide, continuous belt guarantees uniform wrapping of each and every bale - even if it is misshapen.


Feed Rate Shut-off Valve

This ensures that the film will overlap accurately for rectangular bales.

Basic model

This ensures that the film will overlap accurately for rectangular bales


Info & Contact

Technical data (basic model)

Weight:2,350 kg (5,180 lbs)
Length:5,620 mm (18’ 6”)
Width:2,410 mm (8’)
Height:3,180 mm (10’ 6”) (with the lift axle extended)

For all bale dimensions:

up to 1.20 x 1.40 m (48” x 56”)

Bale length:

up to 1.60 m (63”)

Round bale diameter

0,90 - 1,50 m (36” – 60”)
Oil requirement:

starting at 20 l/min at max. 190 bar

Bale weight round / spacemax. 1,800 / 1,000 kg (max. 4,000 / 2,200 lbs)


Required connections

1 pressure connection and 1 depressurized return for the supply of the wrapper

3-pin power outlet for the electrical supply including direct supply line to the battery (cable cross-section 2x6 mm²)

7-pin power outlet for the entire lighting system (excluding work lights)

Additional equipment

Width altered to 2,545 mm,
Height altered to 3,240 mm (with the lift axle extended))

Required connection: 3-pin socket for electrical supply of the hand-held terminal (12 V / 10 A)

Stops the wrapping process if film tears or runs out

17.5 kW diesel engine, water cooled, battery, electric starter, hours counter, return filter and 44 l hydraulic oil tank

Switches automatically to idle speed after the wrapping process or extended intervals – Only in combination with 3-cylinder diesel engine Kubota

Customers can choose from a large selection of drawbar eye types

All drawbar eye types